
Strona tytułowa | Nowości | Nasza oferta | Cennik | O firmie | Zgłoszenie
POS-566
550
MHZ K6-2 Pentium Processor
Multimedia POS Control Board 100 MHz BUS CLOCK
Właściwości | Dane techniczne | Sposób zamawiania | Ceny
Compatible to LPX Spec.
Features - Właściwości
There are a lot of application POS (point of sale) in our
daily life such as in ATM machines, Hotel & Restaurants,
Retail Stores, Supermarkets, Public Transit systems, Global
Positioning System (GPS) and so on. For those
applications mentioned, normally we will require many I/O
connections and rugged features which can never be
met by commercial motherboard.
Specifications - Dane techniczne
- Support AMD K6 300MHz, K6-2 550 MHz, Intel Pentium MMX
233MHz, Cyrix 6x86MX, IDT C6,...etc. Processors.
- RAM: Up to 768MB SDRAM 3 pcs DIMMs.
- Cache Memory: 512KB
- Chipset: ALI5, support 100 MHz CPU Clock
- LCD / CRT Controller:
- CHIPS 65555 64-bit flat panel controller
- Built-in HiQColor technology for super clear STN
flat panel.
- Display Memory:2 MB EDO RAM
- CRT Resolution up to 1280x1024 256 colors,
1024x768 64 K colors, 800x600 64KMcolors
- 36-bit direct interface to flat panel and
resolution up to 1280x1024 256 colors, 1024x768
64 K colors, 800x600 64Mcolors
- LCD Interface Connectors:
- 50-pin Header for 36-bit LCD and 44-pin/41-pin
connectors for 24-bit LCD.
- Support 3.3 V or 5V flat panel
- Support Mono, Color STN, TFT, EL,... wide range flat
panel products.
- Optional One Channel or Two Channels LVDS module.
- 10/100Mbps Ethernet Controller:
- Realtek RTL8139 IEEE 802.u 100BASE-TX standard
- Dual auto-sensing interface to 10Mbps, 100Mbps
Networks
- RJ45 connector for 10BASE-T and 100BASE-TX
- Full duplex capability
- Full software driver support
- Serial Ports: Three RS-232C Ports, One RS-232C, or
RS-422/485 Port
- Parallel Ports: Two SPP/EPP/ECP Parallel Ports
- Floppy Port
- Enhanced IDE Interface:
- One 44-pin Header for 2.5" HDD
- One 40-pin Header for 3.5"HDD
- PCISATM Bus Expansion to support ISA and PCI
bus signal.
- Creative Sound Blaster 16 compatible and Roland MPU401
UART Mode compatible.
- Isolated Digital I/O:
- Digital Input: 4 channels
- Isolated channel with common power
- Digital input level: Logic level 0 :+1V max.
- Logic level 1: 3.5V to 30V
- Isolation voltage: 3750V
- Input impedance: 3Kohm/0.5W
- Digital Output: 4channels
- Isolated channel with common power
- Open collector to 30V
- Isolation voltage: 3750V
- IOutput current: 600mA per channel, total 3A max.
- E2KEYTM
Funtion:
- A non volatile 1Kbit EEPROM is provided to retain
critical data, like Password, System ID,...etc.
- Support atx AND PS/2 power supply
- Support ATX and PS/2 power supply
- Watch-Dog Timer:
- Can be set by 1,2,10,20,110, or 220 seconds
period. Reset or NMI was generated when CPU did
not periodically trigger the timer.
- Flash Disk: Support M-System DiskOnChip Flash DIsk ChipTM
2MB to 144MB
- Power Consumption: +5V/5.5A(AMD K6-2-350MB, 384MB SDRAM)
- Operating Temperature: 0-60o C (CPU
needs Cooler)
- Operating Humidity: 5-95%, non-condensing
Ordering Information - Sposób
zamawiania
- POS-566 : 400MHz K6-2 / Pentium Processor
Multimedia POS Control Board
- POS-566L: without Audio Function
- LVDS-01 : One Channel LVDS Module
- LVDS-02 : Two Channel LVDS Module
Ceny - patrz tutaj
Jeśli
chcesz otrzymać więcej informacji wypełnij i wyślij ankietę.
Strona tytułowa | Nowości | Nasza oferta | Cennik | O firmie | Zgłoszenie
Jeśli masz uwagi lub pytania
dotyczące tej strony www prześlij je na adres guru@perytnet.pl
Copyright © 1997, 1998, 1999, 2000 GURU Control Systems. Data
ostatniej modyfikacji: 5 czerwca 2000