USB-2405/S - 4 kanałowy DAQ USB

  • Moduł USB DAQ - 4 uniwersalne wejścia analogowe 24-bitowe 128 kS/sek z równoczesnym próbkowaniem i z 2 mA prądem wzbudzenia dla czujników IEPE oraz 2 programowalne wejścia/wyjścia 3,3 V/TTL.
  • USB-2405/S - 4 kanałowy DAQ USB

Features

  • Hi-Speed USB 2.0
  • USB bus powered
  • 24-bit Sigma-Delta ADC with built-in anti-aliasing filter
  • 4-CH simultaneous sampling analog inputs, up to 128 kS/s
  • AC or DC input coupling, software selectable
  • Analog or digital triggering
  • Supports 2mA excitation output on each analog input channel for IEPE sensor measurement
  • Full auto-calibration
  • Supporting Time-Frequency analysis software -- Visual Signal DAQ Express

Specifications

  • Analog Input
      • Channels: 4 (simultaneous sampling)
      • ADC Resolution: 24 Bit
      • ADC type: Delta-sigma
      • Sampling rate: 1 ~ 128 kS/s
      • Input range: ±10V
      • FIFO buffer size: 2k samples per channel
      • Input Configuration: Differential or pseudo-differential
      • Input impedance:
        • 200 kΩ (between positive input and negative input)
        • 16.93 kΩ (Between negative input and chassis ground)
      • Input coupling: AC or DC, software selectable
      • Integrated Electronic Piezoelectric (IEPE):
        • Current: 2 mA or 0 mA, software selectable
        • IEPE compliance: 24 V
      • Over-voltage protection: ±60 V
      • Input common mode range: ±10 V
      • Trigger source: Analog or digital, software selectable
      • Trigger mode:
        • Post trigger,
        • Delay trigger,
        • Middle trigger,
        • Gated trigger,
        • Pre-trigger,
        • Post or delay trigger with re-triggering
      • Data Transfer: Programmed I/O, continuous (bulk transfer mode)
    • Digital Input/Output
      • Channels: 2 programmable function I/O
      • Compatibility: 3.3 V / TTL (single-ended)
      • Initial status: Input (pull low)
      • Input voltage:
        • Logic low: VIL = 0.8 V max; IIL = 0.2 mA max.
        • Logic high: VIH = 2.0 V min.; IIH = 0.2 mA max.
      • Output voltage:
        • Logic low: VOL = 0.8 V max; IIL = 0.2 mA max.
        • Logic high: VOH = 2.0 V min.; IIH = 24 mA max.
      • Over-voltage protection: -2 ~ +7 V
      • Supporting modes:
        • Static digital input/output
        • Pulse output, max. frequency: 4 MHz
        • Frequency/Event counter, max. frequency: 4 MHz
        • Digital trigger IN
        • Synchronization sample clock IN
        Function I/O shares the same I/O pins,
        such that only one of these modes can be selected at a time.
      • Data Transfer: Programmed I/O
    • General Specifications
    • I/O connector: Four BNC connectors and 4-pin removable spring terminals
    • Operating temperature: 0 ~ +55°C
    • Storage temperature: -20 ~ +70°C
    • Power requirements: 5 V@400 mA (USB bus powered)
    • Dimensions (W x D x H - not including connectors and stand): 115 x 150 x 40 mm
    • Relative humidity: 5 ~ 95%, non-condensing

Software Support

    • OS Information
      • Windows XP, Windows 7/8 x64/x86
    • Software Compatibility
      • LabVIEW, MATLAB, Visual Studio.NET
    • Software Recommendations
      • U-Test, Visual Signal DAQ Express


Ordering Information

  • USB-2405/S - 4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module

Optional Accessories

  • USB-2M-L - 2 M USB Type A to USB Mini-B cable with lockable connector

 

Jeśli potrzebujesz dodatkowych informacji zadzwoń do nas (22 831 10 42) lub napisz wiadomość. 

Gwarancja 24 miesiące - Gwarancja udzielana przez sprzedawcę na okres 24 miesięcy.

Gwarancja standardowa 24 miesiące

Opinie użytkowników
Zapytaj o produkt:

Jeżeli powyższy opis jest dla Ciebie niewystarczający, prześlij nam swoje pytanie odnośnie tego produktu. Postaramy się odpowiedzieć tak szybko jak tylko będzie to możliwe.

E-mail:
To pole jest wymagane do złożenia zamówienia.
Pytanie:
To pole jest wymagane do złożenia zamówienia.
pola oznaczone - To pole jest wymagane do złożenia zamówienia. - są wymagane
pixel