PCI-9812A

  • Karta PCI - 4 wejścia analogowe 12-bitowe 20 MS/sek z równoczenym próbkowaniem i 128 k-Sample FIFO oraz 3 wejścia cyfrowe TTL
  • PCI-9812A
Features
  • Supports a 32-bit 3.3 V or 5 V PCI bus
  • 12-bit A/D resolution
  • Up to 20 MS/s simultaneous-sampling rate
  • >17 MHz -3 dB bandwidth
  • 4-CH single-ended inputs
  • Bipolar analog input ranges
  • User-selectable input impedance of 50 Ω or high-input impedance
  • Onboard 128 k-sample A/D FIFO
  • Analog and digital triggering
  • External clock input for customized conversion rate
  • Bus-mastering DMA for analog inputs
  • 3-CH TTL digital inputs
  • Compact, half-size PCB
Specifications
  • Analog Input

    • Number of channels: 4 single-ended
    • Resolution: 12-bit
    • Maximum sampling rate: 20 MS/s
    • Input signal ranges, impedance and overvoltage protection:
      range ±1 V, input impedance 50 Ω/15 MΩ, overvoltage protection ±2 V
      range ±5 V, input impedance 50 Ω/1.25 kΩ, overvoltage protection ±10 V
    • Accuracy: ±1.5 % typical
    • DNL: ±0.4 LSB typical, ±1.0 LSB maximum
    • INL: ±1.9 LSB typical
    • Input coupling: DC
    • Trigger sources: software, analog and digital trigger (5 V/TTL compatible)
    • Trigger modes: software-trigger, pre-trigger, post-trigger, middle-trigger & delay trigger
    • FIFO buffer size: 128 k samples
    • Data transfers: bus-mastering DMA

  • Triggering

    • Analog Triggering

      • Modes: pre-trigger, post-trigger, middle-trigger, delay-trigger
      • Source: CH0, CH1, CH2 and CH3
      • Slope: rising/falling
      • Coupling: DC
      • Trigger sensitivity: 256 steps in full-scale voltage range

    • Digital Triggering

      • Modes: pre-trigger, post-trigger, middle-trigger, delay-trigger
      • Source: external digital trigger
      • Slope: rising edge
      • Compatibility: 5 V/TTL
      • Minimum pulse width: 25 ns

  • External Sine Wave Clock

    • Input coupling: AC
    • Input impedance: 50 Ω
    • Input frequency: 300 kHz to 40 MHz
    • Input range: 1.0 to 2.0 Vpp
    • Overvoltage protection: 2.5 Vpp

  • External Digital Clock

    • Input coupling: DC
    • Input impedance: 50 Ω
    • Compatibility: 5 V/TTL
    • Input frequency: 20 kHz to 40 MHz
    • Overvoltage protection: diode clamping, -0.3 V to +5.3 V

  • Digital Input

    • Number of channels: 3
    • Compatibility: 5 V/TTL with 10 KΩ pull down resistors
    • Overvoltage protection: Diode clamping, -0.3 V to +5.3 V
    • Data transfers: bus-mastering DMA with A/D samples

  • General

    • I/O connector:
      BNC x 5
      10-pin ribbon male
    • Operating temperature: 0˚C to 40˚C
    • Storage temperature: -20˚C to 70˚C
    • Relative humidity: 5% to 95 %, non-condensing
    • Power requirements: +5 V 1.4 A typical
    • Dimensions (not including connectors): 173 mm x 108 mm
Software Support
  • Operating Systems

    • Windows Vista/XP/2000/2003
    • Linux
    • Windows CE (call for availability)

  • Recommended Software

    • AD-Logger
    • VB.NET/VC.NET/VB/VC++/BCB/Delphi
    • DAQBench

  • Driver Support

    • DAQPilot for Windows
    • DAQPilot for LabVIEW
    • DAQ-MTLB for MATLAB
    • PCIS-DASK for Windows
    • PCIS-DASK/X for Linux
Ordering Information
  • PCI-9812A - 4-CH 12-Bit 20 MS/s Simultaneous-Sampling Analog Input Card with 128 k-Sample A/D FIFO

 

Jeśli potrzebujesz dodatkowych informacji zadzwoń do nas (22 831 10 42) lub napisz wiadomość. 

Gwarancja 24 miesiące - Gwarancja udzielana przez sprzedawcę na okres 24 miesięcy.

Gwarancja standardowa 24 miesiące

Opinie użytkowników
Zapytaj o produkt:

Jeżeli powyższy opis jest dla Ciebie niewystarczający, prześlij nam swoje pytanie odnośnie tego produktu. Postaramy się odpowiedzieć tak szybko jak tylko będzie to możliwe.

E-mail:
To pole jest wymagane do złożenia zamówienia.
Pytanie:
To pole jest wymagane do złożenia zamówienia.
pola oznaczone - To pole jest wymagane do złożenia zamówienia. - są wymagane
pixel